QH-150 Hairpin Edge Bending Machine
For the fast, efficient and accurate bending of copper strip
- Pneumatic operation.
- Two handed safety control
- Excellent set up characteristics
- Tooling controls and supports the copper section to ensure forming quality
| Copper section - minimum | 2 mm x 1.0 mm |
| Copper section - maximum | 15 mm x 2.5 mm |
| Bending pin diameter | 6 mm - 30 mm |
| Maximum bending angle | 180 degrees plus/minus 3 degrees compensation |
| Pins supplied as standard | 8 - 10 - 12 - 15 mm |
| Supply | 230 V single phase, 6 bar pneumatic |
| Dimensions | 2500 x 1000 x 1200 mm (L x W x H) |
