IMPREG-M Impregnation Tanks
For impregnation of electric motor coils with resin, motorised version with storage tank and immersion tank.
Suitable for use with a wide range of varnish including trickle and water based types. The varnish is pumped back into the storage tank after the part has been immersed. Fumes are kept away from the operator. The sealed storage tank prevents solvent loss and maintains varnish in the best condition. Once the storage tank is filled. The lid of the immersion tank is lifted and the job lowered in. The pump is then switched on and the varnish is pumped into the tank. Very simple operation providing the best results.
IMPREG-M-A 1.0m internal size, 1000 litre capacity
IMPREG-M-B 1.2m internal size, 1728 litre capacity
IMPREG-M-C 1.5m internal size, 3375 litre capacity
IMPREG-M-D 2.0m internal size, 6000 litre capacity
Pump flow rate:
10 gallons (45 litres) per minute
Pump motor: 415V, 3 ph. + neutral; 10 amps /phase. Fan Motor 240V, 1 phase; 5 amps.
|a width mm||1700||1750||2015|
|b depth mm||1610||1840||2000|
|c height mm||1745||2075||2330|
|d overall height mm||2120||2685||3015|
|Immersion tank capacity - litres||1000||1728||3375|
|Useable internal dip tank dimensions cm||100 x 100 x 108||118 x 118 x 125||136 x 136 x 137|